Qv_HOLR7LTM

Montana BLACK is the superior can of it’s class. The Nitro-Combination based formula ensures a high coverage, matte finish, perfect control and handling. Short drying time allows rapid re-application and overlapping with other colors immediately. With it’s high pressure valve, Montana BLACK allows users fast application. Make sure to SHAKE WELL due to a High Pigment Load!

MONTANA BLACK – SHAKE WELL

Shake can well! Remove the nozzle, turn the can upside down, and allow the safety ring to fall out. The safety ring prevents accidental triggering during transport and storage. Turn the can upside down. Hold can tight. Strike the bottom of the can with the palm of your other hand while it is upside down. Repeat several times to loosen the mixing balls from settled pigment at the bottom of the can. Shake vigorously until the mixing balls are heard moving freely. Shake the can upside down taking advantage of gravity for approximately 1 minute. Shake further for upto 2 minutes. Replace the nozzle carefully back into the valve. Test spray away from any objects or on a scrap piece of material to ensure the cap is applied properly and the paint is mixed sufficiently. Re-shake if required. Enjoy Painting

How to activate a Montana BLACK correctly

Don’t Do This Please!

Don’t strike against another can or other hard objects! DON’T DO THIS ❌ A can is content under pressure and it can burst ‼️

Montana BLACK 400ml – Special Nitro Combi Graffiti Spray Paint made in Germany! Enjoy Painting!

Want to visit a Montana Cans retailer near you? Please check out our storefinder